Ask Experts Questions for FREE Help !
Ask
    islandtravler's Avatar
    islandtravler Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 1, 2010, 04:30 PM
    I need a 30 amp GFI breaker or recepat
    Please let me know what GFCI that you have that I can mount in a PVC box with the reset exposedas well as the cost in quanities?
    Thanks Keith
    Please respond to : [email protected]
    Or 787-690-2233
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Feb 1, 2010, 04:43 PM

    There is no such thing as a 30A GFI receptacle.

    Also, this is not a sales site. It is a DIY help message board.
    No one is here selling material.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to wiring gfi 50 amp breaker I have red black white copper wire [ 1 Answers ]

How do you wire a 50 amp gfi double pull circuit breaker to a hot tub. From hot tub I have a hot black and red and white neutraul where do these wires go on the breaker.

Bathroom GFI outlet trips breaker at breaker panel [ 2 Answers ]

Hello all. Our house is approximately 13 years old. Each morning when both the iron and blow dryer is plugged into two separate GFI outlets in the master bathroom, the circuit will trip the 15 amp breaker in the breaker panel. Is it possible to upgrade the breaker to a 20 amp without...

Wiring entire bathroom using 20 amp GFI breaker [ 7 Answers ]

Hello to all... and thank you for reading this. Here it is... and I know there are other ways (easier) to wire the bathroom, but this is how it is done now so I must proceed forward. I have sent a 12-2 wire into a 4 gang box in the bathroom (from a 20 amp GFI breaker... all wires to all...

GFI Breaker ? [ 1 Answers ]

I have a generator with a 240v main breaker. I want to step down to wire 2 120v outlets. I have ran the wire from the main breaker to my sub panel (50 amp GFI), connected the neutral to the ground bar and the pigtail out of the double pole breaker to the neutral bar as well as the neutral to the...

Replacing a circuit breaker with a GFI breaker- q on neutrals [ 1 Answers ]

In process on installing withquestion on neutral wires. Do you take the neutrals out of the in the main panel neutral and put them in into the breaker where its labelled "load neutral terminal" and only have the neutral "pig tail" to the panel neutral bar? Thanks!

View more questions Search