Ask Experts Questions for FREE Help !
Ask
    Nick44's Avatar
    Nick44 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 1, 2010, 01:33 AM
    Limit or rollout switch open concord furnace
    I have a Concord 80 plus furnace. The code I'm getting is Limit or rollout switch open. The burner goes out after a few minutes and the blower motor keeps running. If I wait it resets itself after 15 minutes it will do it 3 times then it won't reset for an hour. I found two limits on each side of the burner if I push the button the burner will come on. My question is are the limits bad or is something else causing it? I would appreciate any help.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 1, 2010, 04:15 AM
    The limits could be weak allowing a trip when not necessary BUT that is usually not the case unless they have been reset many times in the past.

    Make sure all registers are open and that the air filter is clean OR new. Try that then post back with results.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Open rollout error code in 2 yr old Goodman furnace,but rollout tests good [ 5 Answers ]

Vgftft

Limit or rollout open [ 3 Answers ]

I have a ducane furnace model MPG075B3A. The gas valve is flashing 4 flashes the code is limit or rollout open. I cannot find my owners manual to find the location of these switches. Any help would be appreciated.

I have a concord hot air furnace the diagnostics is saying rollout open what is this [ 0 Answers ]

Concord hot air furnace doesnot fire up. The diagnostic is telling me rollout open. What is this and can I fix it myself?

Open limit switch on Concord Gas Furnace [ 14 Answers ]

I have a Concord 80 Plus Gas Furnace. I am starting the furnace for the winter and it gives me a LED code of open limit switch or limit switch circuit. Everything seems to work fine up until the point where the blower needs to turn on. I had the same problem last year but got a tech to fix it. I am...

Brayant 80t furnace, 'Limit or flame rollout switch is open"? [ 1 Answers ]

HI, I am new here and am having a furnace problem. As a new homeowner I would like to take a look at this myself before just grabbing the phone books. I have a Bryant 80t furnace. Built in 2000 and has been serviced every other year. Unit is clean and in good shape. Woke up to a cold house and...

View more questions Search