Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
92 ford ranger
[ 1 Answers ]
Do I need a scan tool to clear check engine light on a 92 ford ranger 2.3 liter after its been fixed or is there another trick?
1995 ford ranger 2.3l timing belt issues
[ 1 Answers ]
On my 1995 ranger I cannot remove the bracket that holds the ac compressor and ps unit this needs to be removed to get the timing belt cover off the timing belt cover is loose but is stuck due to this bracket I have loosened 3 bolts 2 very close to ps unit and 1 right under the ac compressor I...
Ford Ranger
[ 1 Answers ]
2001 Ranger. I found dangling down from left side rear a hose with a cilp. It was attached to the axle housing. What is it for and where does it go. It just appears to be some type of air hose but is not attached to anything at other end. Should I be concerned? Thanks
92 Ford Ranger 2.3L
[ 1 Answers ]
Anyone, what problems does the Check Engine light going on usually indicate? I was coming home tonight, about an hour highway drive and the light momentarily came on, then off, on and off. Not a flicker, but for several minutes at a time. Truck is VERy reliable and there is no indication that...
My ford 2.3 in a 91 ranger
[ 3 Answers ]
Hey guys my problem is that I just swaped out a 2.3 for another 2.3 and when it runs it idles fine for a little bit then it seems like starts to miss then boggs out and dies and back fires like a cannon so bad it blew a brand new muffler out of round it kind of seems like it gets a rich smell of... View more questions Search
|