Check out some similar questions!
Pump motor
[ 6 Answers ]
The 5 hp electrical motor that drives the pump for my SPA will not start on low speed. When turned on it hums. I hit the Jet switch and the pump/motor comes on at high speed. I can then hit the Jet switch again and the pump/motor will run on low speed. When the set temperature is reached, the...
Timer For Aboveground Pool Pump
[ 5 Answers ]
Hi! I am a pool novice. I have a frameset aboveground pool with a cheesy pump - 1/16 HP, 120V. It's plugged into a heavy duty garage outlet, but it's not clear if it's a GFCI. What kind of pump timer can I use that is safe and inexpensive, possibly GFCI? Thanks!
Can't seem to get the pump off the washing machine motor...
[ 1 Answers ]
I have a Whirlpool washing machine, and am pretty sure I need to replace the motor coupler. I got the cabinet off; unclipped the pump (removed the hoses -- oops, probably didn't have to do that); and it LOOKS like the pump could be coaxed off the motor -- and it almost does. The bolt-like drive...
Wiring Timer Clock, Off /On switch to Pool Pump
[ 3 Answers ]
I recently replaced an underground electrical line for my pool pump. Now I'm not certain of the hookup from the main power (220)to the timer clock (also 220)into the manual off/on switch mounted in it's own box on the back of the timer box, to the pump motor. Can anyone help me here. It's a single...
Connecting pool motor
[ 1 Answers ]
I am trying to reconnect a new pool motor (AO Smith 1 1/2 hp). I think I have everything together correctly but after I reconnect the motor to the plate, I can not fit it back on to the pump. When I remove the plate it fits just fine but with the motor attached, I can not make it fit. Any... View more questions Search
Add your answer here.
|