Check out some similar questions!
ABS/PVC Pipe Connections
[ 7 Answers ]
I am about to do a modest bathroom remodel on a 40 year old house. The existing DWV piping is black plastic ABS pipe. I want to use the white PVC but I read somewhere that you should not join the two different pipe types directly. Is this accurate? If so, what is the easiest method. The only other...
Abs pipe versus pvc
[ 6 Answers ]
I am planning to have a drainage system installed in my basement in order to alleviate a water infiltration problem. Some basement waterprofing companies use a 4" PVC pipe with 2 rows of 1/2 " perforated holes , others use a 4" ABS corrugated pipe with slits on the circunference. In both cases...
PVC glue on ABS pipe
[ 2 Answers ]
I glued my ABS pipe with PVC glue... will it be OK
Combining PVC pipe and ABS pipe.Bad Idea Jeans?
[ 15 Answers ]
I'm remodeling a bathroom and mistakenly did my drainage using pvc pipe. My house had ABS, and we used some of the ABS that we cut out together with the PVC. This was all glued together with PVC primer and cement. I didn't realize that the black pipe was not pvc until tonight when I was...
Advisability of bonding ABS pipe to PVC pipe.
[ 1 Answers ]
I'm replacing the sink in the bathroom. The drain pipe extends too far from the wall to match up to the new sink. The original material was PVC. I need to cut it to make it fit, so I'll have to bond a new elbow to connect the trap in the correct location. The replacement pipe parts (elbow, trap,... View more questions Search
Add your answer here.
|