Ask Experts Questions for FREE Help !
Ask
    jeanskip's Avatar
    jeanskip Posts: 7, Reputation: 1
    New Member
     
    #1

    Jan 26, 2010, 12:40 PM
    Convert 2 prong outlet to 3 prong
    I have a house in Orange County California that was built in the mid 60s and the house has all metal outlet boxes with ground wire attached with metal clips on the front and they had a two prong outlet. I want to convert to 3 prong. I already installed one outlet with a 3 prong and then used my 3 prong outlet tester and it shows that everything is OK and its showing no open ground. Is this acceptable. Or would it be better to take the clip off and attach wire to the recept. Thanks
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #2

    Jan 26, 2010, 11:08 PM

    Wire oulet with pigtail on ground screw and a pigtail from box. Tie to ground wire with wire nut.

    Good luck

    Chuck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Connect 240V 3 prong motor to generator W/ 240 4 prong outlet? [ 6 Answers ]

As summarized, I'd like to run a 240 volt motor with 3 prong twistlock plug off my Generator that has a 240V 4 prong twistlock outlet, Have purchased a 4 prong dryer plug & cord. Not sure what function the extra lead performs, any help is greatly appreciated, Thanks...

Convert 2 prong outlet [ 14 Answers ]

This is existing wiring from the mid 60s on all the outlet boxes and all outlet boxes have a ground wire attached to the metal outlet box and they were originally 2 prong outlets and I want to convert to 3 prong do I need to use another ground wire and attach to metal box and green screw on the...

How to convert 4 prong 240VAC to 3 prong 240 VAC. [ 5 Answers ]

My generator has a 4 prong 240 VAC outlet. I would like to convert it to the 3 prong 240 VAC house plug to connect it to the transfer panel inside the house. Of course the two live 120 VAC stay, I just do not know what to do with the ground and neutral. >Moved from Forum Help<

Convert 4 prong 240 generator outlet to 3 prong [ 6 Answers ]

How do I make an extension cord from my 4 prong 240 twist generator outlet to a 3 prong 240 outlet for my radial arm saw?

Changing 4 prong dryer plug to work with 3 prong outlet [ 1 Answers ]

I have a dryer I haven't been able to use. I moved into an older house and bought a wall outlet to match the plug that's on the dryer. The problem is, any way I rewire the outlet with given wires it won't work.


View more questions Search