Ask Experts Questions for FREE Help !
Ask
    deljanderson's Avatar
    deljanderson Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 26, 2010, 02:28 AM
    The spindle needs to be replaced on the motor is there a replacement part
    The spindle will not hold the fan is there anything that can be done the motor is fine
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Jan 26, 2010, 04:03 AM

    Is there not a set screw to hold the fan on? Could you drill and tap for a set screw? I'd do one on each side for balance. Not much info to go on, but motor shafts are not usually a diy replacement. Good luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

5hp briggs and stratton tiller motor need model # or replacement motor [ 3 Answers ]

I have an earthquake tiller model 5020 with a 5hp briggs and stratton motor that I need to replace but I can not find the model of the motor. Does anyone know which motor replaces that motor or do you know the model number of the motor that was used on that tiller?

Replaced motor now spinning backwards [ 4 Answers ]

Replaced motor now spinning backwards The blower motor in our furnace went out. It was making a loud pitch nose the night before and then locked up. I got the motor out of the housing and took it to the supply house and got a new one. Put it in and got it all wired up. Put everything back...

A/c not cooling after replaced fan motor [ 3 Answers ]

I recently replaced a condenser fan motor. New motor works great. However, no cold air. I've noticed while outside unit running the fan will turn off for a fraction of a second and then back on. Is this a compressor problem now? A maintenance tech at the factory I work at suggested "jump...

Condenser motor replaced still not working #2 [ 1 Answers ]

Wiring looks good. Does it matter if capcitor is touching metal ? We had no way to attach the new capiter. The old capiter with 3 wires is enclosed in plastic tube, so we did not remove it, just bypassed it. New capiter has 2 wires, instead of 3. When we unplug the new capitor, fan still...

Condenser motor replaced still not working [ 1 Answers ]

Hello, Monday, a/c condenser fan was making loud noise and within an hour of us noticing this, The condenser fan was froze up We replaced the condenser motor and capacitor . It appeared to be working fine for about an hour after new condenser motor and capacitor was in. House temp went...

View more questions Search