Check out some similar questions!
Drain King Nozzle Stuck in Drain Pipe
[ 8 Answers ]
I have a Drain King #501 nozzle stuck in a 1-1/2 drain pipe at a T joint. The nozzle and hose inserted easily past the joint for several feet and cleared the clog in the drain pipe. I turned off the water and was able to pull the hose out until the nozzle came to the joint. It will not come out...
Snake stuck in drain pipe
[ 4 Answers ]
I used a power snake with 1/2 in cable, went in 10 - 15 feet and it wouldn't go an further. Now the snake won't go in or out. How can I get it out. I bought a retrieval tool with a 3/8 inch cable. How do I use it.
How to remove a rusted galvanized steel drain pipe
[ 1 Answers ]
My galvanized steel drain pipe that is 60 years old has a crack in it can this be fixed or do I have to replace it I had some one look at it and they said they could not unscrew the 18" pipe because iit was seized this pipe is the drain pipe from my sink. I had opened the wall to locate the leak....
Drain cleaning bladder stuck in pipe
[ 1 Answers ]
I have a clog in one of my 2 main house drains. While trying to blast the clog out with a drain cleaning bladder (1.5 - 3 inch size), I think that the bladder passed the point where the pipe gets larger (i.e. under my basement floor). The garden hose has been disconnected from the faucet input...
Rusted drain pipe broke off, how do I fix it...
[ 1 Answers ]
We were having some kitchen cabinets installed and the drain pipe the goes into the wall for the sink broke off, well part of the threads broke off inside the 45 deg. Connector inside the wall. I can see the 45 deg connector and it looks fine and so does the pipe inside the wall, we removed the... View more questions Search
Add your answer here.
|