 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Peerless faucet
I have installed a new peerless kitchen faucet model P99355. It is a two handle faucet with a sprayer. After install I turned it on and it worked well for about 2 minutes then started to sputter causing the pipes to bang loudly. Short of buying a new $150 faucet what advise do you give for this problem?
|
||||
Check out some similar questions!
Have an older Peerless faucet with two clear plastic on/off knobs and the hot water side is leaking. Turned water supply off and took handle off on the hot water side and there appears to be a plastic cartridge inside with an O ring on the outside of the cartridge and smaller one inside. Will just...
The hot water does not have much pressure from my single handel faucet, the cold water has good pressure. Help jamamock
We have a two handled peerless kitchen faucet with sprayer. Water just trickles out and nothing come out of the sprayer. When it is turned on it spits out a little water then there's a clunking noise like when the spayer is used, then after a pause the water flows slow, very slow (2-3 minutes to...
After removing the chrome cylinder and the retainer from the top of the cartridge, what do I do next to extract the cartridge from the faucet assembly.:) confused:
I have a Peerless bathroom sink faucet. It is a two-handled faucet. The faucet is leaking, and the water feels cold, so I'm getting it relates to the cold water faucet. I removed the handle and pulled out the cartridge, but the bottom of the cartridge is flat. There is a rubber washer embedded in...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
