Ask Experts Questions for FREE Help !
Ask
    kdonetta's Avatar
    kdonetta Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 23, 2010, 10:39 PM
    Arcoaire gas furnace turns on but the burner doesn't ignite
    My ArcoAire gas furnace cycles on but the burner doesn't ignite (it's not kicking on) and heat is not blowing through the vents. I changed the filter and replaced the batteries in the thermostat. Everything was fine and clicked on but only for that initial cycle period then the heat turned off. I could hear it on but no airflow??

Check out some similar questions!

Bryant Furnace turns on but does not ignite [ 1 Answers ]

Bryant furnace come but fails to ignite. I have replace the flame sensor and ignitor but still does not ignite.

Gas furnace cycles on but burner does not ignite [ 0 Answers ]

=dup

Arcoaire propane gas furnace won't ignite [ 0 Answers ]

This went out on Sunday while we were away from home. We can't get it lit and are not sure what is causing the problem. It is snowing here and about 28 degrees. No one can come out until Thursday or Friday. HELP!!

Bryant furnace - must press manual rollout reset for burner to ignite [ 2 Answers ]

My Bryant 350MAV furnace is not working properly. While the blower is first running it flashes a code 12. Then the light goes on solid and the burner never ignites. If I hold the manual rollout reset button for 20 seconds the ignitor starts to glow and the burner ignites. What needs to be...

Gas furnace burner won't ignite [ 5 Answers ]

I have a 26 year old Friedrich gas furnace model GHA075NDC that the burner will not ignite. The pilot is lit and I can turn the fan on, but the burner will not ignite. Can anyone help me solve this problem?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.