Ask Experts Questions for FREE Help !
Ask
    bernard33's Avatar
    bernard33 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 22, 2010, 08:38 PM
    How to put an angled toilet flange in
    My old toilet has a 10" center while the new one has a 12" center. I can get an angled flange that will make up the 2" needed. How do I connect/cut the original cast iron pipe and attach the new plastic angled flange?
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #2

    Jan 23, 2010, 05:27 AM

    Is your house on concrete slab or raised foundation ?

    In any case, it is not an easy job to install off-set flange but it can be done. That is especially true in case of concrete slab.

    Lot (lot) easier is to purchase TOTO toilet . What it is - is a regular toilet and it comes with special connecting base to fit your existing rough-in. It is more expensive but the job can be done in 15 minutes. Besides, TOTO are considered to be one of the best toilets on market.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Toilet Flange and Rocking Toilet [ 9 Answers ]

Hi. We had a leak in our toilet so we had to pull out the wood floor. We are getting ready to replace the wood, but want to ensure we can solve the issue. We had issues with our toilet rocking and the last plumber just doubled up the wax rings and then caulked around the base of the toilet...

Toilet flange bolts make toilet sit at wrong angle [ 2 Answers ]

Previous owners put a bathroom in the rec room. When they installed the toilet flange (to the sewer) it was not aligned with the wall. The toilet sits at a crooked angle, not aligned to the wall. After removing the toilet - the flange that holds the toilet bolt-downs needs to be rotated so...

Trying to put flange back on pot light [ 4 Answers ]

I am trying to put the flange back into my pot light, but my the drywall hole is larger than the opening of the hole into which the can sits... basically, the clips from the housing do not clip under the drywall because the edge of the drywall is too far for it to reach... Question: Can I...

Looking for good Advise on replacing toilet flange on concrete slab to install toilet [ 26 Answers ]

To whom it may concern: I got a problem with a toilet that has been rocking and twisting for quite some time until it started leaking and what now I pull up the toilet to find out that the flange is broken on one side. I tried that flange plate from home depo but it won't work because the slab is...

Cast iron toilet flange the bolt holes will not hold how do we fix it and the flange [ 1 Answers ]

We have a cast iron flange and the bolt holes are not useable can we cut off the top and add a new plastic flange

View more questions Search