Check out some similar questions!
Whirlpool washer, agitator works, but during the spin cycle it doesn't spin
[ 1 Answers ]
I have a whirlpool washer, I replaced the outer tub and the drive block, but it now doesn't spin. It drains the water, I can hear the motor come on, and feel the vibration . The switch is fine. I looked at the couple, but did not take it apart. The clutch looked fine, sanded the pads and case....
Whirlpool Washer Spin
[ 3 Answers ]
I have a whirlpool washer that will not go into final spin. You have to manual turn the tub clockwise about two turns, Re-set the switch to final spin, close the lib, then it will go into final spin. What is the problem or do I need to replace the switch. Thank YOu;
Whirlpool washer agitator won't turn
[ 1 Answers ]
My washer started making some weird noise for a few washes ago and now won't agitate or spin. I turned it over and found ground up rubber on the floor and part of a rubber part with a hole in the middle that looks like it was between the motor and the part that turns the agitator and basket... View more questions Search
Add your answer here.
|