Ask Experts Questions for FREE Help !
Ask
    AlleyCat63's Avatar
    AlleyCat63 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 20, 2010, 07:32 PM
    Trane xb90 steady blinking led anout 1 sec
    Pre-blower motor runs 3-5 secs, then off 1 sec, propane is full, furnace does not fire

    I have powered off & on. Same results

Check out some similar questions!

Trane XE90 LED blinking continuously, why? [ 1 Answers ]

My Trane XE90 LED is blinking continuously. What does this mean?

Trane furnace XB90 diagnostic LED light is flashing 4 times [ 1 Answers ]

My furnace does not blow out any heat but only cold air blows out.. trane XB90 and the diagnostic LED light is flashing 4 times... please help we are cold.. the code for 4 times flahinf light says open limit device.

Trane XE 80 AC or Heat not working LED is blinking contsly [ 1 Answers ]

My AC stop e working and a tech told me it was the blower motor so I went out and purchased a replacement. The replacement said it was a 3 speed and not a 4 like the one I had will that make a difference? The new one didn't have one wire that the other one had and when I asked the person I bought...

LED on Trane XB90 not on [ 2 Answers ]

I have an Trane XB90 furnace and just recently moved the thermostat up a bit on the wall to make room for a light switch. I didn't cut power first and think I touched the stat wires. After hooking the stat back up the furnace would not turn on. I recycled power to the furnace and that did not help....


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.