 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gas dryer will stopped working
The initial problem was the dryer was running but had no heat. The igniter did light and the flame ignited but only lasted for about 20 second. The drum continued to turn... I replaced the Thermostat limit because it did not ohm properly... After reinstalling new thermostat limit the dryer ran for a longer period and the flame stayed lit. suddenly it shut off. The flame was gone and the drum stopped turning. Now the drum does not turn when I press start.
Any help would be greatly appreciated. Admiral Model# adg7005aww |
||||
Check out some similar questions!
I have a Kirkland Signature, by whirlpool Dryer that stopped heating and timer stopped working at the same time. What may have caused this?
My GE dryer stopped working mid cycle and now it doesn't work anymore. Help. Im a girl and very poor and I have to try and do it myself.
8 years old, Gas It has been acting up for a few days... not starting right. You have to turn the dial around to different spots and then maybe it would go. Then It just stopped fully. Called repair service for this Thursday.
I have a Trane XL80 gas furnace. It also has a heat pump for ref. Today, the temp in our home dropped and I noticed that the furnace was not working. I opened it up, and vacuumed it out, and have no idea why it started working. All was good! However, hours later, the temp is again...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
