Ask Experts Questions for FREE Help !
Ask
    topsie krets's Avatar
    topsie krets Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 15, 2010, 06:39 AM
    Can I change a 110v plug for a 240v plug
    I have a 110 v henry hoover that has been used on construction sites as I have no longer need for it on site I was wondering if I can convert it to 240v so I can use it at home
    izhammer's Avatar
    izhammer Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Mar 7, 2010, 10:13 AM
    Try this from toolstation

    http://www.toolstation.com/shop/Electrical/Industrial+Connectors/Fly+Lead+Socket+Convertor+13amp+lead+to+16amp+Sock et/d190/sd2430/p47166

    Regards,

    C.E
    titos's Avatar
    titos Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Mar 18, 2012, 09:05 AM
    I have a 220v Henrry... I can change it to the 110v you have
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Change 220v plug to 110v plug without harming appliance? [ 4 Answers ]

Can we cut off the 220v plug and connect a 110v plug and not harm the appliance? Or is there a plug converter available?

Can I replace a 240v plug/cord with a 110v plug/cord on a KitchenAid Mixer (5KMP50)? [ 5 Answers ]

I have acquired a KitchenAid Heavy Duty 5-quart 10-speed Mixer model #5KPM50, which has a European-style 240v plug. I know there are converters available, but I want to replace the 240v plug with the standard 110v plug used in the USA. Can I replace just the plug or should I replace the plug and...

Change 4 wire dryer plug to 3 wire plug [ 1 Answers ]

How to change a 4 wire dryer plug to a 3 wire plug

12-3 wiring from gfi plug to outlet to plug in a 110v pool pump [ 5 Answers ]

Need to verify proper wiring for above 110v pool pump.

20 Amp 110V Locking Plug adapter [ 1 Answers ]

Hello, I recently purchased a core drill with a locking plug, 20 Amp/110 V, which I hope to use at any location, not in a single shop. I would like to know if it is possible to find an extension already built to handle this for use at any location (with a non-locking, standard 3 wire male end)....

View more questions Search