[MrsVRP]

We recently installed a new dishwasher and now the hot water pressure in the dishwasher and the kitchen faucet is slow. The cold water pressure is fine. Both the hot & cold pressure throughout the house is fine. Please advise how we can resolve the problem. Thanks

[ballengerb1]

How did you dtermine that the washer has poor pressure? How long does it take to fill for a cycle? I would remove the faucet cartrudge and clear it of dberis. However, the washer taps into the line long before the faucet, did you use a Tee or what to make the tap?

[MrsVRP]

For the washer, we ran a cycle on cold, then hot. When the hot water cycle finished, the dishes just did not appear as clean as when we ran a cycle on cold water. We just assumed the pressure was poor like the faucet as the hose if connected to the same pipe

[Milo Dolezal]

How did you connect water supply for DW ? Is the valve open all the way ? How about hot water supplies to the sink: isn't it kinked ?

[ballengerb1]

This does not add up for me, there is no cold supply to a dishwasher, you can't run a cold cycle. How on earth did you connect hot and cold to a machine that has one inlet??