 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
What is a Woods 2-way amplifier #1042?
A friend gave me a piece of equipment that he said would strengthen reception for my analog television (which has an hdtv converter attached to it). All the info I can find on this gadget is: Woods 2-way amplifier, 10 dB gain, #1042, 120vac, 60Hz, 2w. Will it improve anything to install it? And, is it safe to install? Thank you.
|
||||
|
||||
|
Amplifiers can't improve bad signals. The signal has to be good someplace, like where it enters the house. The amp can compensate for cable loss, splitter loss etc. Two way amps are necessary with cable modems. I haven't looked for any data, but this could have an in and an out or an in and mutiple outs. Not knowing cable lengths and type of cable (RG59 or RG6) and the configuration of the amp, I'm unable to help more. |
||||
|
||||
|
This is an example: Bi-Directional Amplifier (10 dB reverse gain) - Cables To Go They may not work well on antenna systems because of the frequency response. Need more data. A mast mouted amp like the channelmaster CM 7777 would be great. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Please help me out with answer... Can a diode be used 4 amplification purpose... If yes give me some specific applications... Hope my information is sufficient.:)
I have a system in my 97 2dr ford explorer;Alpine deck, 1 4-farat power acoustik audio cap, 2 12in audiobahn Flame Q Subs: 1100 watts RMS, and 4000 watt Lanzar Vibe286 Amplifier. But my problem is I want it louder! So I was took it to a local stereo shop and they looked at my amp and told me right...
You know, I am a beginners when it comes to construction of Audio amplifiers. I would like to know Sir if it is possible, in order to attain a 200 watts or even 300 watts amplifier output, I will only interconnect The output of 1 amplifier (100 watts) to the input of another amplifier (100 watts...
Hey there: I have a 1200W, 2 Channel, Sony amplifier and recently upgraded my subwoofer. Unfortunately when I put the new sub in it didn't work. I checked and I have voltage at the amplifier and it says that everything is running properly but there is nothing at the outputs to my subwoofer. My...
View more questions Search
|
