Ask Experts Questions for FREE Help !
Ask
    graniali's Avatar
    graniali Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 12, 2010, 04:38 AM
    What size amp electrical fuse do I use for a domestic fan heater
    I need to change a fuse in a domestic fan heater what size of amp fuse do I use please??
    graniali's Avatar
    graniali Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Jan 12, 2010, 04:39 AM

    What size amp fuse do I use for a plug on a domestic fan heater?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Jan 12, 2010, 07:03 AM
    Heater should say, if not, replace with same as before.

    Receptacle should already be fused/protected.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What electrical fuse do I use for a house fan heater [ 0 Answers ]

What size amp fuse do I use for a home fan heater? Please help before buying

What size fuse should I use in my disconnect for a 27 amp draw on a motor [ 1 Answers ]

I am running a piece of equipment that draws 27 amps which is on the nameplate of the motor but keep blowing 30 amp fuses . What size fuse should I have to protect this motor. Can I upgrade the fuse for say 35 amps.

What size wire for 30 amp 240 volt electric heater [ 1 Answers ]

What size wire should I use for a 30 amp 240 volt electric heater for my guarge?

200 AMP Electrical Service Feed Wire Size/Type [ 1 Answers ]

Good Morning, I live in the Chula Vista, CA area. (San Diego). I built a granny flat. I have a 400AMP underground service from the street to a 2 meter base on my existing home. 200 AMPS for the front house on one meter, and 200 AMPS for the rear house on another meter. There are two, 200AMP...

Wire size on 200 amp electrical service [ 1 Answers ]

I am installing a single phase, 200 amp service on a new summer home that I am building. My question is about wire size for wire running from the meter pan to the breaker panel. I am told that I need 2/0 wire for each phase, but an electrician told me that I can drop down one size (1/0) for the...

View more questions Search