 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Have an janitrol split system and have no heat but blower does come on
When in heating mode, blower comes on but no heat. 24v at the transformer, but not at the contactor. Have a brown and white wire coming from the t-stat white wire but only one white wire going to the sequencer. 24v at main sequencer but not coming out. Yes changed both sequencers as well
|
||||
Check out some similar questions!
I have a Miller split system heat pump with emergency heat. I want to replace the existing thermostat with a new programmmable model. It currently uses a Honeywell LR69071/ T841 thermostat (not sure of actual model number). It is wired as follows: x=blue w2=white r=red g=green o=orange...
I live in the Leesburg, Florida area(outskirts of Orlando, Florida) and is considering using tthree ( 2, 3, and 4 ton) Carrier 16 SEER infinity series heat pumps in a new construction. Can anyone provide a breakdown of the average cost of each condenser (25HNA6... ), fan coil (FE4) and infinity...
I have a 7 year old Carrier 10 SEER split System Heat Pump, Model 38YCC. I asked the local Carrier Installer whether it is a single stage or multi-stage unit, so I can buy a new programmable thermostat appropriate for my unit. The Carrier installer rep I spoke with said it's a multi-stage unit,...
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -
The problem presented itself when the fuse blew 3mo ago that was connected to our TRANE split system heat pump TWR030C100A0 on 3 separate occasions. We flipped the breakerand everything switched back on and held for weeks at a time. This last time it would not stay on. We replaced the fuse and...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
