Ask Experts Questions for FREE Help !
Ask
    lumber5077's Avatar
    lumber5077 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 9, 2010, 10:23 AM
    Hampton bay motion sensor
    Do I need a special bulb? I had to replace it and now its not working right it seems to stay on bright.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Jan 10, 2010, 06:05 AM
    Need more detail that what has been provided.

    Model number of the sensor?

    What type of lamps?

    Check the specs of the sensor, some only are rated for incandescent lamps, others will work with compact fluorescent lamps.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Motion Sensor Settings for Hampton Bay Light [ 3 Answers ]

I have a Hampton Bay Exterior Motion Sensor Wall Lantern light. Model 248-523, Bar code 0-46335-90429-3. The light has two slide switches, one on each side of its base. I am missing the installation instructions and would like to know how to set the slide switches so I can have the light operate...

Hampton Bay outdoor flood light (motion/optical) [ 1 Answers ]

My HB flood lights stopped working recently, but if I turn the unit to "test", wave my hand in front of the sensor, the lights pop on. Turning it back to 1,5, or 10 minute timer delay does not work, even in the dark. Faulty opical sensor? Would that prevent the unit from operating in timer mode?

Hampton Bay motion sensor [ 1 Answers ]

Installed new Hampton Bay motion sensor to replace old one that stayed on. It is installed correctly as red sensor light on, however, I cannot get it to go on either in test mode or real. It will not go on a motion sensor or steady light. Did the on/off several time and nothing. Bulbs are good....

Hampton Bay Exterior Motion Detect Lights... [ 1 Answers ]

This will be a dumb question, but our contractor put up two of the Hampton Bay Motion Detecting lights on our detached garage. The problem is that they pitched the boxes, and the directions before we even had a chance to figure them out. Now, only the test works, which stays on for 10 seconds. ...

View more questions Search