Ask Experts Questions for FREE Help !
Ask
    wildwilly10011's Avatar
    wildwilly10011 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 8, 2010, 08:57 AM
    Inducer motor is rattling need to replace it
    Hi have problem with Carrier Weathermaker 8000 model # 58wav070-08 may problem is inducer motor if rattling need to replace it
    builderbob1's Avatar
    builderbob1 Posts: 41, Reputation: 2
    Junior Member
    		  
    #2

    Jan 8, 2010, 10:57 AM

    Check to see if it is just loose are debri in it.
    wildwilly10011's Avatar
    wildwilly10011 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jan 8, 2010, 04:49 PM
    No.. it is the bearing on the end... it has a rattle when running , lloking for part # I think.. Thanks Randy
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is the inducer motor [ 3 Answers ]

I have a bryant 395C gas furnace and the inducer motor assembly is making noise. The motor seems fine and the furnace operates normally, but there is a plastic wheel attached to the end of the motor that is rattling when the motor runs. I've looked at pictures of many inducer motor...

Carrier 58 motor inducer [ 1 Answers ]

We are freezing due to the inducer motor on our carrier furnace having gone out. The repairment left at quitting time WITHOUT installing the new one! Can you please help us with the reinstallation process? Its only 6 degrees and the temperature is falling.

Hard to replace Rheem Criterion Inducer Motor? [ 1 Answers ]

I found the part #66847 Inducer motor ($200) for my 1992 Rheem Criterion RGDG... The ball bearings were going bad and HVAC companies want from $500 to $890 to replace it. Is it hard or anything tricky about replacing it yourself? I can order the part and try it myself or order the part and have...

Replace Rheem Criterion inducer motor [ 2 Answers ]

Can someone tell me what part number and where I can get a replacement inducer motor on a Rheem Criterion, circa 1992, model RGDG-150ARJR? Already had someone come out and said ball bearings were going bad and motor should be replaced. They wanted to charge me $400 for the motor alone. I see...

Inducer Motor Problems [ 6 Answers ]

I have a Goodman Gas Furnace installed in 1997 and have been experiencing the following problems: The usual run for the furnace has been inducer motor on, ignition (with flames), and then the blower motor comes on. I have been having the inducer motor come on, run for about three minutes,...

View more questions Search