Ask Experts Questions for FREE Help !
Ask
    garb43's Avatar
    garb43 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 6, 2010, 02:31 PM
    No heat in one zone on a baseboard heating system
    Hi I have a baseboard heating system, one if the zone is not working. I have checked the zone valve and that is working so is the thermostats. I do not know what to check next any help would be great.
    Thank you for hepling
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 6, 2010, 03:20 PM
    More info

    Is this hot water?

    What is the water temp in the boiler?

    What is the system pressure?

    Where is the problem zone located?

    Have you manually opened the zone valve in the troubled zone
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Converting forced hot air system to baseboard heating system [ 2 Answers ]

Hi, I have a basic question about heating. Is it possible to change a forced hot air system to a baseboard heating system? And if so, what does it involve exactly? And approximate prices, for about 5000 sq feet house. Thank you very much.

NO Heat in One Zone of Multiple Zone System [ 6 Answers ]

The heat in our four zone house is working except for one zone. Digital Honeywell THermostat lights up when programmed, little flame picture appears and click noise is heard, just like other thermostats, but no heat in that zone. Any ideas what is wrong or how to fix. Thanks

Converting forced hot air system to baseboard heating system [ 1 Answers ]

When considering converting from forced hot air to baseboard heat, is it possible to just add piping / water boiler / baseboards and do nothing with the forced hot air system (use it for AC) ?

2 Zone Heating System [ 4 Answers ]

I have a 2 zone hot water, gas heating system in my home (1 heater, 2 zones). When the temprature drops below 35 degrees, hot water does not cycle through my 2nd floor heating zone. The zones works fine when its above 35, but when its below not hot water circulates thorught the zoen. My 1st...

New two zone heating system not working. [ 1 Answers ]

We are about to close on a new condo and we had a two zone system put in. The problem is when the heat is off upstairs and the temp is set around 70 in the lower level the temp in the upper level reaches 74 or higher and you can feel the heat coming out the vents. The contractor says this is...

View more questions Search