 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Shower Head Drip after replacing internal cartridge and pressure valve
I have a 4-year old American Standard single handle shower faucet (shower-only) that would not allow control of the hot water. I replaced the pressure-valve (m952100-0070) which fixed the hot water problem; however, I now have a very small drip from the shower head. I then replaced both the cartridge (m954440-0070) and the shower head, but the drip remains. I have tried to reseat the pressure-valve/cartridge multiple times and flushed out the control unit, but it still drips. Help!
|
||||
Check out some similar questions!
After some hot water heater problems, I got no water pressure in the tub/shower. I replaced the cartridge (one an knock off that slides real easy and when that did not work I used a 'genuine Moen replacement part') Both to no avail. I still get very little water pressure. I called Moen and they...
I have a 1988 moen single handle shower faucet that won't stop dripping. I took it apart, removed the u-shaped pin, but how do I remove the cartridge to replace the washers?
What is the best replacement valve cartridge for the Moen 620 shower valve?
My delta shower single handle faucet has for quite sometime dripped when turned off--The valve is about 20 yrs old. I installed a new kit about 3 years ago due to a small drip (ball, seals and springs). Once the valve internals were replaced with a new ball, rubber seals and springs, and top...
My shower head continuously drips in my shower stall after I have turned the water off. The funny thing is, it is a hand held so it is enough to push it up the hose and out. I have adjusted the faucet knob and it made no difference. If I take the shower head off the holder and let it hang, I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
