Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks
[ 3 Answers ]
I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.
Intertherm furnace
[ 7 Answers ]
My intertherm furnace comes on but, sometimes it will shut off and sometimes it stays on until I have to turn the breakers off. What do you think is wrong? Thanks
My intertherm furnace pilot lights but furnace won't kick on
[ 5 Answers ]
I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...
Intertherm Furnace
[ 1 Answers ]
The Hot surface ignitor comes on and lights the burner, but goes off after about 9 seconds. It repeats this and then locks out. What could be causing this. Intertherm Furnace: Model #MMHB-56ABHR-01
Intertherm furnace
[ 2 Answers ]
I have just in the last month had an Intertherm furnace installed, and since installation they have had to come in twice because they claim the starter button is not firing. They replaced it and now it is on the fritz again. It starts for about 8 seconds and cuts out. There is fuel in the tank.... View more questions Search
|