Ask Experts Questions for FREE Help !
Ask
    l4steph's Avatar
    l4steph Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 6, 2010, 07:34 AM
    Well pump switch problems
    The switch pump will not turn on and we don't have any water in the bladder tank or in the house. I replaced it with a new one- released all the pressure until the gauge reads 0 psi and cleaned out the pipe that the switch is attached to. Then I open the water valve and turn power on but nothing happens. Can somebody help me. My husband is an over the road truck driver and won't be home till next week. Any help will be greatly appreciated. Thanks!

    Cherry
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #2

    Jan 6, 2010, 11:56 AM

    Does your switch have a reset lever on the side?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pump pressure switch [ 6 Answers ]

How do I adjust the pressure switch on a small water well pump, there are two adjustment screws one is larger than the other. Many thanks, M. Ruen

Pump pressure switch for well pump [ 3 Answers ]

I was wondering if seomone can help me I have a pressure switch which has a little leak but I can't really tell how I could fix it doesanyone have any suggestions or pics on how to fix it

Pressuer switch on a well pump. [ 1 Answers ]

On the pressuer switch there are two adjusters, big spring, and little spring. Pressuer switchs normaly come preset. I have a good but used pressuer switch. How do I adjust the pressuer switch manually.

Well pump pressure switch [ 1 Answers ]

Manostat pressure switch ,has 4 screws on front for wires( 2 black wires and 2 white wires)and then two ground wires .These are all the wires coming in for switch . My friend took them off and does not remember how they were hooked up. Please help if you can.Thanks.

Switch on circulator pump [ 7 Answers ]

Is there any problem with me putting a regular toggle light switch on a circulator pump? I want to be able to shut the pump down at will without going up 3 flights to turn the thermostat down.

View more questions Search