Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Moving kitchen sink cut up the slab floor cani pour concrete on top
[ 7 Answers ]
I am moving my kitchen sink from one side of the kitchen to the other I located the 3" discharge line which is about 5' from my new sink. I have cut the concrete and i am about put a 3 x 3 x 2 tee and then run my 2" line along and up under the sink to the p trap with a 90. ( I hope this is correct)...
Installing toilet directly on concrete subfloor/slab
[ 3 Answers ]
Living in a loft - going for that "loft" look and want to re-install my toilet directly onto the concrete slab (floor had ceramic tile before). Concerned that the flange will not be set low enough in current state - don't want gap between toilet base and floor obviously. Is there a type of flange...
Who can tell me how to pour a shower pan on wood subfloor
[ 3 Answers ]
I completely remodeled my home and all that is left is to complete a master bedroom bath, which has a jacuzzi tub with a 36" by 36" shower next to it which will be tiled, floor and all. I have done many bathroom tile jobs, but have never done a shower stall floor. I haven't found much help or info...
Can I Pour Concrete Over Plywood Subfloor
[ 2 Answers ]
I would like to put a concrete floor in my living room its on the first floor with only a small crawl space under it. It has a plywood subfloor that I would like to cover with a thin but durable layer of concrete that I can stamp and color.
Cdx 19/32 plywood subfloor--I think I goofed
[ 8 Answers ]
I just finished laying down a subfloor in my basement. Here is what I did: over concrete slab (fully sealed with radonloc cement sealer) 2X4 pressure treated sleepers nail gunned into conrete at 24" o/c ( 3 1/2" side lying flat ) 1" styrofoam insulation dropped in between sleepers 19/32... View more questions Search
|