Ask Experts Questions for FREE Help !
Ask
    jgikas's Avatar
    jgikas Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 4, 2010, 03:50 PM
    Kenmore oven not heating to desired temperature
    Kenmore oven not heating to desired temperature
    Flying Blue Eagle's Avatar
    Flying Blue Eagle Posts: 2,056, Reputation: 225
    Ultra Member
    		  
    #2

    Jan 4, 2010, 10:52 PM

    JgIkas-You need to check out the thermostat;; one way is to take a thermometerthat will go to at least 350 degrees( f )PLACE in oven and set for 20 min;; turn theoven on and set for 20 minuts;; at the end of the 20minuts if there is more then 25 degrees difference in the oven temp and the ,Then the thermostate will need to be adjusted,or replaced;; to stay safe call a appliance service person;; ;;I hope I have answered your question: LET ME KNOW;; GOD BLESS ::F.B.E.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heating turns itself off before reaching desired temp [ 9 Answers ]

Background: I have an older Trane furnace (manufactured 8/1994) made by American Furnace Inc. (The Trane Company, Trenton, NJ) model TUJ080A936A0. The module controller is by White-Rodgers Emerson Electric Co. Model 50A52-101. There is no gas pilot light. Problem: Recently, my gas valve will...

My heat won't stop when desired temperature reached [ 1 Answers ]

Hi, I have 5 electronic zones, each with a separate thermostat, running off a single circulator motor. Two of my zones were heating up way beyond the temperature set on the thermostats. I shut off the thermostats but the zones kept getting heat until I finally turned off the boiler. I've...

Bryant furnace shutdown before desired temperature [ 8 Answers ]

My furnace runs for ten minutes blows heat but shuts off before reaching desired temperature thermostat set for 72 and it is 60 degrees in my house. I turn the thermostat Off and then turn it back on and the heat cycles for ten minutes.

Heater runs and then shuts off before desired temperature achieved [ 9 Answers ]

I recently installed two new programmable thermostats in my house, one for the upstairs unit, one for the downstairs unit. The upstairs functions great. It's a bit different on the first floor... I programmed the unit to keep the heat at 62 during the night and bring it up to 68 at 6am. The...

New Sauna Heater Trips GFI When Desired Temperature is reached [ 5 Answers ]

I have just installed a new outdoor sauna. The new sauna heater trips the GFI breaker when the thermostat shuts the heater off after reaching the specified temperature. I have a 50 amp GFI breaker in the house 200amp load box. From there I ran #6 wire for 120 feet to an external weather proof...

View more questions Search