How to identify which wires hook to a two pole contactor

Check out some similar questions!

Where to hook up condenser wires? [ 5 Answers ]

I have found the pair of wires to hook up the condenser on to the wire terminals. Now I hook up one wire to the common and do I hook the other to the W connector or the Y connector on the controller terminals?

2 Pole contactor heater connection [ 1 Answers ]

I have a heater that uses a 2 pole contactor between the heater contorl and the power supply. The contactor is a White Rogers 90-249 40 FLA @ 277 VAC. There are no instructions on which pins to use on the contactor for power in, where to connect a ground and which pins to use to connect to the...

2 White Wires from GFCI single pole breaker [ 2 Answers ]

Hello, I understand electricity quite well, but I have never seen this before. I am replacing a GFCI circuit breaker (15A), with a non GFCI breaker (15A), and am confused because there are 2 white wires (and the black), coming out of the bottom of this breaker. I know the newer breakers have a...

Where do the wires hook up to? [ 1 Answers ]

Hello, I have a package unit, I want to add electric heat. I received the heat package but with no instructions on where to hook-up the wires from the contactor energizing the heating elements. I understand that one of the wires should go to the w1 on my thermostat, but where does the other wire...

Which wires to I hook up to new thermostat? [ 5 Answers ]

I would be so grateful if someone could help me out. I have an old Janitrol thermostat, just purchased a Lux programmable one. The wiring doesn't all match. I'm having a hard time with the RC and RH, which have a jumper--this is on the new one. Here is the diagram for the old wiring: ...

View more questions Search

Check out some similar questions!

Add your answer here.