 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Replacing Coleman therm with Honeywell RTH8500
I would like to replace my Coleman thermostat with the Honeywell RTH8500, and would like some help with the wiring. My system is a Coleman heat/cool heat pump, with a control box mounted on the oil furnace (emergency heat). The wires on the existing Coleman thermostat are: E blank, G green, B black, O orange, Y yellow, R red, X blue, L brown, W2 white. The wires on the Honeywell RTH8500 are: L, E, AUX, RC, R, O/B, Y, G, C.
Any assistance would be greatly appreciated! Thanks, Duane |
||||
Check out some similar questions!
I have been trying to connect a new honeywell rth8500 to a Trane unit (believe it is a heat pump). The Trane unit is currently hooked to a Trane thermostat with only 4 wires. They are set as follows Black - Zone Red - Common Blue - Cool setpoint Green - Fan sw The old Trane thermostat...
I'm replacing a Honeywell T8575D2003 with a Honeywell RTH8500. Didn't think there would be issues, manuals are all straight forward. However when I removed the T8575, the wiring set up did not match what the RTH8500 was expecting. The T8575 has 8 wires connected as follows < 1 ...
Hello: I have a Carrier. My system is a heat pump. In the paper it say it use two stage thermostat. Does this mean that my heat pump unit is a two stage heat pump? I called Honeywell and the told me to select the unit as a " multistage heat pump with backup or external electric heater. I...
Can someone confirm that I am wiring my new Honeywell RTH8500 thermostat the right way. I am replacing a Weathertron Baystat240. RTH Connection Label Wire Color RC Jumper R (R)Red O/B ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
