 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Drain water from system. Unhook old heater and remove. If you plan to keep it unhooked you will have to install a bypass between the two connected lines on hot water or a cap if a one line system as in steam. Usually this will do the trick BUT there is always other possibilitys.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Cutting through cast iron How is it possible to cut through a cast iron soil pipe
A leak developed in the main cast iron vertical stack of pipes leading to the horizontal main drain. Unfortunately, for me, the leak was so close to the ground that I had to break the concrete slab of the house. At that point, it just made sense to dig an extra 4 inches or so and remove the bad...
Hi , Im project manager of a 8 story building and I'm in charge of choosing the type of tubings for piping of sewage system and waste water . I'm wondering if I have access to Cast-Iron and UPVC pipings, which of these pipings is more reliable and although I know cast-iron is too out of date...
Can I switch from cast iron waste, vent pipe to pvc? I just moved to North New Jersey and am not sure of the codes there.
Hi folks, What is the best way to repair a leaking tub drain that connects to cast iron main drain? Thank you, Jen
View more questions Search
|
