Ask Experts Questions for FREE Help !
Ask
    ksgood44's Avatar
    ksgood44 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 2, 2010, 06:58 AM
    Looking for a thermocouple for coleman presidential III gas furnace
    We have a 1986 Casa Villa park model mobile home with a Coleman Presidential III gas furnace uses LP gas, after lighting pilot the furnace may run several hours or even several days then goes out? I have relit the furnace about 3 or 4 times each week looking to buy thermocouple for it
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Jan 2, 2010, 08:19 AM
    Thermocouples are just about available anywhere local to you. The only thing you need to be aware of is the length. If you get one to long you can leave the unused portion coiled up.

    It may not be a thermocouple problem but a restriction in the pilot orifice. This will make the pilot flame to small and eventually the pilot will go out. This entails removing the pilot assemble and cleaning the very small hole called the orifice. Very small spiders and other very little critters build webs in the pilot and that restricts the orifice opening or dirt from the gas can also do this. Whatever you do try not to increase the little orifice hole since then you will have to replace the pilot assembly.

    If you need parts or other asistance see link below and post under Coleman.

    Index page
    Attached Images
     

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring diagram for coleman evcon presidential gas furnace [ 2 Answers ]

I need a wiring diagram for a Coleman Evcon Presidential gas furnace. Where can I find one on the internet?

Coleman Presidential Gas Furnace [ 3 Answers ]

Our mobile home Coleman Gas Furnace will let us light the pilot light, but when we click the thermostat up, no flame will ignite. Is it possibly a "flame sensor" not recognizing? Can we troubleshoot/fix ourselves? Model #7680 Series 856 Thank you!

Coleman gas furnace presidential trouble shoot [ 1 Answers ]

Coleman gas furnace model 7655 series 856 blower shuts down every 30 seconds and starts again in 15 seconds, unable to heat mobile home

Can't find pilot on coleman furnace presidential III [ 2 Answers ]

Where is the pilot on a coleman furnace presidential III 7970A856

Coleman Presidential III Model # 7970A856 Furnace [ 6 Answers ]

Coleman Presidential III Model # 7970A856 Furnace The furnace runs for 1-2 minutes, then shuts off for about 30 seconds to a minute, then comes back on. It does that until it gets to the temp I set the thermostat to. I called the local technician, he said it was the fan Switch. He said check the...


View more questions Search