Ask Experts Questions for FREE Help !
Ask
    7C's's Avatar
    7C's Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 1, 2010, 01:02 PM
    Bryant plus 90 code 43
    I have a Bryant Plus 90 series. I'm getting a code 43. From what I gather in my search, does it have anything to do with the blower motor?

Check out some similar questions!

Bryant 330AAV Code 34.every now and then. [ 2 Answers ]

Wanted to know if anyone could help me troubleshoot this problem.. This furnace will not fire up (every now and then), basically what happens is the igniter lights up, but will shut down after 5 seconds or so. It will do this three times until it goes into lock down, code 34 flashes. I reset...

Bryant Plus 80 Code 33 [ 10 Answers ]

I have a Bryant Plus 80 that is throwing a error of 33 (limit or flame roll out switch is open). The last time this happened was because the hot surface igniter was broken (frequent problem as my furnace has a tendency to short-cycle). I had picked up a couple extra ones so I had them on hand to...

Bryant 352MAV Code 32 [ 6 Answers ]

Am having a problem with my Bryant 352MAV furnace. Intermittently, the furnace will fail to "run" and the status LED flashes a code 32. I did some troubleshooting on this a year ago and things seemed to be fine but now it's acting up again. Originally I disconnected all of the small diameter...

Bryant flashing 24 code [ 1 Answers ]

My heater/Ac is not working checkedthe fuse it was burt out replaced it and it blow again now it's flashing code 24. What do I do now??

Bryant Plus 90 code 33 problems [ 16 Answers ]

Hi everyone, I have a 9 year old Bryant Plus 90, model #CD5AXW024017AAAA that keeps giving a code 33. After doing some investigating, I found that an old filter was still against the blower motor along with the current filter. The old filter was completely clogged- I think it worked its way...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.