Ask Experts Questions for FREE Help !
Ask
    W&T's Avatar
    W&T Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 1, 2010, 10:05 AM
    Rth5100b
    We just installed this thermostat according to the instructions and have found that the fan continues to blow air even though the unit has reached the desired temperature, sometimes for over an hour. Please advise what can be done to correct this problem. Thank you!
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 1, 2010, 10:10 AM
    Revisit the thermostat install and check for possible shorted thermostat wiring. Then check setup for imput. Then do the G wire test. Remove G wire from terminal strip in the indoor unit and run test. If fan does not run on it is a wiring or stat problem.

    http://customer.honeywell.com/techli.../69-1926EF.pdf

    Post back with results
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell rth5100b thermostat [ 2 Answers ]

My son in law god bless attempted to change the thermostat from an old honeywell mercury themostat to the above model but neglected to label the wires. We can get it turn off and on but the unit continues to run outside. What are the proper connections Thank you.

Thermostat honeywell RTH5100b [ 1 Answers ]

I want to change my old thermostat for they RTH5100b and the old one got only two wires white and black and no letter. Where the wires goes on the new one

View more questions Search