Ask Experts Questions for FREE Help !
Ask
    TDOC1988's Avatar
    TDOC1988 Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 28, 2009, 06:41 PM
    Bhp of 2000 ek9 type r civic
    Bhp of 2000 ek9 type r civic
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
     
    #2

    Dec 28, 2009, 09:01 PM

    Have you tried Googling it?
    (You're on there!)
    Plug through whatever comes up till you find what you're looking for.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

BHP at particulat speed, [ 1 Answers ]

why power is define in terms of BHP at particular speed?? from Formula T=p/w where, p=power,w=angular speed,t=torque produce, if we decrease w,then torque increases with this formula. So that maxm torque will produce by a vehicle at stationary condition, ...

2000 civic [ 2 Answers ]

I have a 2000 honda civic ex w/120,000 miles on it. A week ago I felt some slight fluttering in the engine. Like it was losing power or not getting any fuel. 3 days ago, while on the freeway the car started to decelerate. I pumped the gas and it went back to normal. Yesterday morning I started the...

2000 Honda Civic! [ 9 Answers ]

Thank you for reading.. I have an error code 1336 on a 2000 Honda Civic - I found it's a speed fluctuation sensor for rpm - or it's called a cfk? Anyway, it's misfiring on all cylinders codes and throws those codes on an OBDII and the 1336 code. Plugs and wires are new and Runs just fine for me...

Jap import ek9 civic 89 won't start [ 1 Answers ]

Hi Ive just recently replaced my engine with another d16a9 Dohc the problem is I hooked everything back up without the drive shafts installed and she fired up OK ran a bit lumpy then the engine light would come on after a few seconds and this corrected the problem but ran about 2000rpm then...


View more questions Search