Ask Experts Questions for FREE Help !
Ask
    vleroy's Avatar
    vleroy Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 28, 2009, 12:01 PM
    I have a question on my weaterman 8000 furnace
    I have a weatherman 8000 furnace. In using it this winter it has become necessary to continually reset the safety switch which is held in by the furnace door. Because I have to do it so often I have now taken the door off and taped the switch in place. Even with it held in however I still have to let it out periodically through out the day then retape it in position. What can I do to help this and what is wrong with it
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    Dec 28, 2009, 12:24 PM

    Having to release and reset the door switch means that you have a problem with your furnace not involving the switch. Some things that happen to your furnace will cause a lock out of your furnace and turning the power off and back on will rewet the lock out.

    So what you need to do is find out what is causing the lock out.

    Can you tell me how your furnace is acting as it starts. I see you are on line so if you will get back to me we can talk about it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier 8000 furnace [ 6 Answers ]

My furnace has an electric lite and the ignitor gets red but my furnace won't lite

Carrier weathermakrer 8000 gas furnace [ 1 Answers ]

Hi, I think I may have left info. Out. It's a gas furnace. The furnace unit is indoors... attachted to an outdoor A/C unit outside due to the central air... all attached to an automatic thermostat. The furnace is NOT blowing any heat. It's just cold air. I've tried to reset it, checked...

Carrier weathermaker 8000 furnace [ 2 Answers ]

Hello everyone, I am trying to locate the reset switch on my Carrier Weathermaker 8000 furnace.Can anyone help me out? Thor T

WeatherMaker 8000 Gas Furnace - No Heat [ 1 Answers ]

My gas furnace is not igniting when the demand calls for it. The LED is lighting 1 short and 2 longs. I think all is working but once it calls for heat it doesn't work. What does the LED code mean?

Furnace Question [ 2 Answers ]

Where can I obtain a wiring schematic for a EPCO furnace model P-T-2-03-15-09

View more questions Search