Ask Experts Questions for FREE Help !
Ask
    hawgway's Avatar
    hawgway Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 24, 2009, 10:43 AM
    Kenmore front load washer attempts to iniate cycle. Fills with water about 2 seconds
    I have a Kenmore front load washer Model 44152 and it attempts to fill with water approximately 2 seconds and then stops. Originally machine stopped in middle of cycle. Machine will not spin.
    bocephus1982's Avatar
    bocephus1982 Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Jan 27, 2010, 09:54 PM

    I am having the same problem. Did you ever figure out how to fix it?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Front Load Washer Clunking Noise in Spin Cycle [ 5 Answers ]

We have had a Kenmore Elite front load washer for a number of years (Model 970-38712-00). Today it started making a clunking noise when it started the high speed spin cycle (similar to putting a pair of runners in the dryer). I took off the back and spun the pulley by hand and heard a clunk...

Kenmore Elite Front Load Washer Spin Cycle not drying [ 2 Answers ]

I have a Kenmore Elite Front Load Washer. Even when I select drain/spin and extended spin, the clothes still come out very damp. It's not making a lot of noise and doesn't seem to be out of balance, but the drum isn't spinning very fast. Any ideas?

Kenmore front load washer fills with water when not running [ 1 Answers ]

I will come back to my front load kenmore after it has sat Idle for several hours and there will be water in the washer and I have to run the drain cycle to get rid of it. I'm worried that it might overflow when I'm gone. Is there a fix? Thanks

Kenmore Washer fills but does not cycle [ 1 Answers ]

I have a 3 year old Kenmore Heavy Duty 2 Cycles 2 Spead Motor with 3 Speed Combinations washer. The washer has filled to the proper height but will not cycle to wash. Is there a reset or could it be the timer?

View more questions Search