 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Sears Kenmore Elite washing machine won't spin
My Sears Elite Washing Machine doesn't always spin and it wants to blow the breaker every once in a while. I've taken the pump off to see if it was plug and it was'nt, I taken the motor off to see if the coupler was bad and it was'nt. I've even run the motor with nothing hooked up and it runs fine. It work fine other than that, could it be the clutch is going out? Thanks! Mike
|
||||
Check out some similar questions!
I'm not sure if I have the correct model number. Nothing on back of washer. Under lid: SM 9710768-C. This is a Kenmore Elite Catalyst heavy duty, top load, king size capacity, ultra quiet pak, 3 speed motor with 6 speed combinations washing machine. I've tried both spin speeds, but neither work....
I have a horrible, Sears Kenmore Catalyst Elite washing machine that is being replaced today. It has broken down once again due to the poor tub design of clothes getting pulled down and stuck into the motor. I won't go into all the details of the multi-year saga. The machine won't/can't drain...
I have a four year old kenmore elite washing machine that will not agitate or spin and only makes a loud humming/grinding noise. It sounds a s if the mottor is running, yet is diengaged from whatever turns the agitator. Any help is much appreciated! Thank you, Dan
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
