Ask Experts Questions for FREE Help !
Ask
    jwebstermit's Avatar
    jwebstermit Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 20, 2009, 05:48 PM
    How to light a pilot
    How do I light the pilot in a gas fireplace
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 20, 2009, 05:57 PM
    Most if not all factory built gas fireplaces have automatic lighting devices installed. Most of the time they are controlled by a switch on the wall,thermostat,or a remote control.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Propane Furnace won't start no pilot light red light flashes 3 times [ 6 Answers ]

My propane furnace G6RC has no visible flame and the red light either stays on or flashes 3 times in a row and then the furnace shuts off and tries to restart

Does putting gas hot water heater dial on PILOT put pilot light out? [ 5 Answers ]

My gas hot water heater dial has OFF to the left, PILOT in the middle and ON to the right. If we are going away and want to not have the water heated can we just turn the dial to PILOT and the flame will stay lit but just won't heat the water or does the flame go out completely and then PILOT would...

Armstrong Ultra sx 80, pilot light lit, but burner does not light [ 4 Answers ]

Armstrong Ultra sx 80, pilot light lit, but heater doesn't turn on

Pilot light stays on but pilot switch keeps resetting [ 5 Answers ]

I have a baso L62AA-5 pilot switch and it used to keep resetting. I would hold the switch down for a good minute and the gas lights, but after a half an hour or so it would go back to its reset position. The standing pilot light was always on and never a problem. After a few days of manually...

View more questions Search