Ask Experts Questions for FREE Help !
Ask
    MBF's Avatar
    MBF Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 19, 2009, 08:55 PM
    Noma 10 hp snowblower
    I have a Noma 29" 10HP snowthrower with a Briggs&Stratton engine. There is a plate that says Murray on it. The auger works great and throws the snow very well. The engine will start on the first or second pull. The problem is that it won't move forward or backward anymore unless I'm pushing or pulling it. It used to move when you engaged the left lever. It is at least 6 years old and I don't have any sort of manual for it. I opened up the skid plate and the friction plate has a few small scores on it, but it's not that bad. There is a loose snap ring around the bar with the friction wheel on it (the one that the wheels are attached to) - I can't see where it came from or what use it might have. Does anyone have any ideas about how I can get this thing moving? Thanks.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Dec 20, 2009, 09:26 AM

    Hi,
    If you can find the plate with Murray on it, what are the numbers?
    Peace,
    Clarke
    MBF's Avatar
    MBF Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 20, 2009, 02:43 PM
    Hi Clarke,

    It says Model # is F2914000 Code 5235. It's made by Murray in Tennessee.

    Thanks, MBF
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dynamark Murray/ Noma Snowblower key [ 2 Answers ]

I have a Dynamark snow blower made by Murray/Noma. Who sells these things? Are they any good... It was given to me Where can I get the plastic key to start it. I'm knee deep in snow and the key is some where in it!

Snowblower [ 2 Answers ]

My Craftsman smowblower starts fine, but whe I pull the handle back to start the auger it makes a screaching break sound and kills the motor.

Snowblower [ 3 Answers ]

826 toro snowblower drive was working now stopped??

Old snowblower [ 1 Answers ]

I have an old Toro 826 used snowblower that was given to me. I cannot start it. I bought a new spark plug, filled the gas tank, even put a little bit of gas where the spark plug goes. I still can not start it. Can someone please help me?

View more questions Search