Ask Experts Questions for FREE Help !
Ask
    thebest4's Avatar
    thebest4 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 19, 2009, 05:47 AM
    Does the plastic housing on a single faucet go flush with the sheetrock or does it st
    Does the plastic housing on a single faucet go flush with the sheetrock or does it st
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Dec 19, 2009, 07:00 AM

    I'm guessing you're asking about the round plastic rough in plate on a tub/shower valve. Right?
    If that's the case we install the face of the plate flush with the sheetrock.
    If I'm wrong click on back with more details. Good luck, tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gardenway Plastic Housing Erosion / Hole [ 2 Answers ]

My 15 year old Gardenway 4 HP (Techumseh) Mdl 47031 has plastic impeller housing. The housing has been eroded from the inside due to the abrasion of leaves, etc. I have tried to temporally patch the hole with (suprise) duct tape and I have tried a more permanent repair w/ 2 part epoxy. Nothing...

How Do You Flush A Faucet Out?: [ 1 Answers ]

Ok, I have a dumb question but what do you mean by flushing the valve? Do you mean turn the water back on once you have the cartridge out? And if so then would you not end up with water running down the inside of the wall? I have to replace the springs and seats as well and want to do it...

Older Kohler single plastic shower handle cracked, where can I get one? [ 1 Answers ]

I have an older Kohler single handle shower system. The plastic handle broke and I can't find a replacement in local plumbing or internet plumbing supply stores.

Loose faucet housing [ 1 Answers ]

Thanks. I have a center-set 2-handle widespread kitchen faucet (learned all that from internet LOL), with the classic "J' shaped spicket that rotates. It seems that the J-shaped section keeps coming loose from the outside of the sink especially with multiple rotations when washing dishes. ...

Broken plastic housing to Helix II light fixture [ 1 Answers ]

First time question asker! A few days ago, I broke a gray plastic piece that helps hold the light bulb to the light fixture. After spending an hour Googling for the part, I give up. This fan is a Harbor Breeze fan (from Lowe's) called a Helix II. Does anyone know where to search for specific...

View more questions Search