Ask Experts Questions for FREE Help !
Ask
    tinkertech's Avatar
    tinkertech Posts: 4, Reputation: 1
    New Member
     
    #1

    Dec 17, 2009, 09:53 AM
    Refrigerant boiling point
    I'm a novice at this ac thing,but I do want to understand exactly what is going on inside the system.Is it correct to say that the refrigerants boiling point is changed by the surface pressure applied to it? Does this mean that when the superheated gas makes its way to the condensing side of the system that the pressure is increased which raises the boiling point for the refrigerant? Is this part of the science that causes the refrigerant to change state back to a liquid,partially because the boiling point is now higher?Or do I have it wrong?Very interested in getting responses on this query!Thank you in advance!
    EPMiller's Avatar
    EPMiller Posts: 624, Reputation: 37
    Senior Member
     
    #2

    Dec 17, 2009, 06:29 PM

    Google "vapor compression refrigeration cycle". You will get a bunch of good hits. To explain the whole thing here is a bit beyond this forum. Just remember that what you learn by reading on the web does not qualify you to do ANY work on your AC system that involves the refrigerant loop.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #3

    Dec 17, 2009, 06:42 PM

    I want to add a few tidbits:

    1. Even a pressure cooker that you cook food with makes water boil at a higher temperature.

    2. There is an energy associated with a state change. Take freezing water from 75 deg F. There is an energy from 75 to 32 F and one for the state change and then more from 32 to below.

    See: Heat pump and refrigeration cycle - Wikipedia, the free encyclopedia
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
     
    #4

    Dec 17, 2009, 10:31 PM
    Quote Originally Posted by tinkertech View Post
    I'm a novice at this ac thing,but I do want to understand exactly what is going on inside the system.Is it correct to say that the refrigerants boiling point is changed by the surface pressure applied to it? Does this mean that when the superheated gas makes its way to the condensing side of the system that the pressure is increased which raises the boiling point for the refrigerant? Is this part of the science that causes the refrigerant to change state back to a liquid,partially because the boiling point is now higher?Or do I have it wrong?Very interested in getting responses on this query!Thank you in advance!
    You ask good questions. The desire for knowledge that you demonstrate bodes well for you in this field. There are many who lack because they don't care enough not to. Seek, young man, and become a better tech for it. ;) P.S. Google is pretty awesome for finding HVAC info.
    Attached Images
     

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Btu's to convert water to steam at boiling point? [ 1 Answers ]

Hopw many Btu's are required to convert a pound of water at 212% at sea level?

Btu's to convert water to steam at boiling point? [ 1 Answers ]

How many Btu's are required to convert a pound of water at 212% at sea level?

What is the Boiling point for Mercury [ 1 Answers ]

What is the boiling point for mercury I need to know by today

Boiling point of cycohexanol [ 2 Answers ]

Why the boiling point of cycohexanol is higher than the boiling point of toulene?

Finding A Boiling Point? [ 1 Answers ]

Given a 10% by mass solution of the compound SCl4 in acetone, what is the boiling point and the osmotic pressure of the resulting solution, which has a density of 1.02 g/mL? Thank you in advance for any help anyone can provide


View more questions Search