Ask Experts Questions for FREE Help !
Ask
    miller291's Avatar
    miller291 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Dec 16, 2009, 06:04 PM
    how to wire a goodman 3 ton 13 seer to a rth3100c
    my wires are BLUE-x,YELLOW-y1,RED-r,GREEN-g,ORANGE-o,WHITE-w1,BROWN-w2, where to wire these wires to a RTH3100c
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 16, 2009, 06:56 PM
    It seems you lost or misplaced your manual so here it is. The manual can explain better than I can when it comes to the wiring. I am also posting a operating manual so after you get it wired you can set it up properly.

    http://customer.honeywell.com/techli.../69-1889EF.pdf


    http://customer.honeywell.com/techli...69-2339EFS.pdf
    miller291's Avatar
    miller291 Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Dec 16, 2009, 07:16 PM
    Wired it up it won't do anything.
    miller291's Avatar
    miller291 Posts: 4, Reputation: 1
    New Member
    		  
    #4

    Dec 16, 2009, 07:19 PM

    Where does it jump from aux to y or aux to e
    miller291's Avatar
    miller291 Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Dec 16, 2009, 07:29 PM

    blue-x yellow-y1 red-r green-g orange-o white-w1 brown-w2 I know where the red ,green, orange go but the y-1 w1 w2 and x are the problem and where should it jump.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can uReplace a 10 seer ac condenser w/a 13 seer w/o changing the inside 10 seer unit [ 8 Answers ]

We have a 10 seer 2.5 ton heat pump outside condensing ac unit, that sprung a leak that cannot be repaired. We have had 5 repairmen come out and look. 3 of them say we have to replace the inside 10 seer 2.5 ton compressor and furnace as well. 1 of the 5 says we can just replace the outside unit...

12 Seer vs 14 Seer cost saving [ 11 Answers ]

I have a 12 year old 3.5 ton 12 seer Carrier electric heat pump. I'm told that parts are rusting (coils?), it has a small refrigerant leak and basically it's got about 1-2 years left. I have a quote for a 3.5 ton 14 seer Carrier Performance series ($8,000, installed) and I'm being told that the...

14 SEER vs 15 SEER Trane Heat Pump [ 2 Answers ]

I received two quotes for a 14 and a 15 SEER Trane R410A heat pump. The price difference was $2900 between the two quotes (there's duct work $$ in the quote as I am doing a major remodel and adding lots of new space) The question is should I ave the $2900 or does the extra efficieny pay off? ...

Air handler seer 10? WIll it be OK with a seer 13 heat pump. [ 1 Answers ]

We are replacing our old heat pump... the air handler was replaced 4 years ago and is good condition. Everyone wants us to replace our hole unit and we really don't want to put out that much $$ at this time. Can we just replace the Heat pump? Or do we have to replace both. Everyone says they...

A different Honeywell RTH3100C installation question - W2 wire? [ 1 Answers ]

"What to do with the W2 (and maybe W1) wire?" I am replacing an old Payne thermostat that controlled a heat pump system which provides heating and cooling, along with "emergency heat". The new unit is a Honeywell RTH3100C. I labeled all the wires as I removed the wires that were attached to...

View more questions Search