 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whirlpool washer won't spin
Whirlpool washer / 10yrs. Old / Model#LBR5232EQ won't spin. You can hear drain pump kick on, you can hear it try to spin. Agitator spins freely, barrel won't move. Looked under as good as I could, looks like it's belt-free. It might be important to mention I found a few short pieces of hard plastic, about 1/2 to 3/4" in length and maybe 3/8" in diameter. I originally assumed it's something the kids had kicked under the washer, but maybe something broke-off. (female with no muscle here @ the time)HELP!?
|
||||
Check out some similar questions!
We have a 8 year old Whirlpool Washing machine model number GSL9365EQ1 It won't spin or drain. We replaced the lid switch and the machine just humms. We have recently replaced the motor coupler. Any ideas what the problem might be? Thanks.
The washer tries to spin but only makes a loud rapid clicking sound. The motor coupler is OK. I replaced the clutch which was badly worn but no improvement. I am now trying to remove the basket following the Whirlpool manual but after removing the spanner nut the tub will not lift. I have tried...
I have a whirlpool washer that will not go into final spin. You have to manual turn the tub clockwise about two turns, Re-set the switch to final spin, close the lib, then it will go into final spin. What is the problem or do I need to replace the switch. Thank YOu;
Whirlpool top-load washer won't spin or agitate, it makes an awful sound but doen't do anything. It does fill and drain.
Just bought a new whirlpool washer (MD#: WTW5790SQ0), the spin cycle on the washer doesn't work on any cycle EXCEPT normal wash. This was determined by: closing the lid, selecting each individual spin option on the dial and pulling the knob out (starts washer). Both spin cycles work on the Normal...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
