Ask Experts Questions for FREE Help !
Ask
    gavinsky's Avatar
    gavinsky Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 10, 2009, 02:19 PM
    Craftsman snowblower moves very slowing in all gears. No real power
    Craftsman 10.5 hp snowblower in gears 1 to 6 creeps along very slowing with no real power in the wheels. Same for reverse.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Dec 10, 2009, 04:15 PM

    Check the shifter linkage from the handle down to the units transmission. Show not bow or bend. Some blower have a two part linkage held together in the center with 2 screw or bolts, drop one bolt and the linkage bends
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    Dec 14, 2009, 08:34 AM

    Hi,
    Just to add Craftsman machines use a drive disc whose rubber perimeter can wear out. With a model number you can try this link for a parts breakdown.
    Ordertree.com | Lawn Mower Parts | Emergency Preparedness
    Peace,
    Clarke
    gavinsky's Avatar
    gavinsky Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Dec 21, 2009, 11:10 AM

    I had topped up the oil and overflow had dripped on to the rubber,maybe the previously perimeter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman 9.5 B&S snowblower won't turn [ 6 Answers ]

I thought the pull start was frozen. Trying to pull enough cord out for it to snap back I broke it. I tried the electric starter and just got a buzz. We had a few freeze and thaw cycles with wind and rain so I figured It was frozen up as well. I moved it in doors. All warmed up same buzz from the...

Craftsman snowblower cuts out [ 1 Answers ]

I have a Craftsman snowblower (Model 31A-3bde799 with 5.5HP Tecumseh motor) that starts easy, but won't stay running longer than a few seconds to a few minutes. I bought it used this past August and the guy had to fill up the tank to start it. The snowblower has not been started since then,...

Craftsman Snowblower [ 2 Answers ]

Craftsman Snow blower 2 cycle engine sometimes starts with choke, Idles but with a sound like a miss fire, replaced plug no help, When it does start and choke is turned off engine seems to rev real high then stalls immediately, then won't start, also will stall immediately under Snow blower load....

Snowblower stopped abruptly. Seized or gears? [ 6 Answers ]

I was using my 30" cut snowblower the other day and had been running it for about 25 minutes when it abruptly stopped while engaging the drive mechanism. Engine just shut down and could not pull start it as rope was locked up. Blower had been running fine, had it serviced towards the end of last...

View more questions Search