 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Weak/Intermittent hot water to shower
I've looked through a few threads, but still not really sure where to go with this.
The hot water in the shower seems to be of quite low pressure... it eventually turns scalding hot, but as soon as any cold comes on it seems to overpower it and turn it off. Occasionally I can get the balance just right, but it's very awkward, and will slowly change towards cold or hot. The shower is relatively old, and controlled by individual hot and cold knobs. The water heater is in the roof of the unit, therefore a bit hard to get to, but can be accessed if necessary. Hot water seems to come out fine from all other taps - maybe a bit low pressured though, but seems to mix fine at the sink. |
||||
Check out some similar questions!
I have plenty of piping hot water in the bathroom sink. But, lukewarm water in the tab next to it. It is a simple 4-way valve behind the wall for the tub. 2 Inlets, one for hot water and the other for cold water. 2 outlets, one for the tub and the other for the shower. The cold water knob is...
We just moved into a house and have NO hot water in the master bathroom shower, however, we do have hot water in the sink. What could be the problem?
I have a brand new home, two showers, only one gets hot water pressure, I have attempted to disassemble the single handle dial to try to find any issues, and I found a small chunk of wood at the dial, and removed it, but still have the same issues, I can't seem to get the rest of the pieces to come...
I have a shower in my master bathroom in which the water does not get hot. The water in the sink in that bathroom gets hot, and the water in the adjacent bathroom's bathtub gets hot. The water heater is turned up to ~140F, but we still can't get hot water in the master shower. I believe I have a...
I have hot water in sink but not in the shower
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
