Carrier Gas HVAC Burners go out when I replace the side access panel?

SpaMan Posts: 1, Reputation: 1

New Member

Dec 8, 2009, 09:41 AM

Carrier Gas HVAC Burners go out when I replace the side access panel?

My Carrier Gas HVAC unit works fine with the service panel off, but as soon as I try to replace the panel the burners start to cavitate and go out.

Check out some similar questions!

Bryant Plus 80 gas furnace won't ignite burners [ 6 Answers ]

I own a Bryant Plus 80 gas furnace. The fan will run if I set the thermostat to "Fan On" instead of "Fan Auto". But the burners will not ignite. I have followed the user manual instructions to re-start the furnace, but that didn't work. I have a gas water heater and it is heating so I know the gas...

Carrier Furnace - Burners turn on and off [ 2 Answers ]

On my Carrier furnace (model 58G5100-2) the igniter starts the pilot, and most times the pilot starts the burners after a minute or two and then the blower motor starts. Other times, pilot lights the burners which burn for a minute or two, stop and then start again... and after a few minutes...

Carrier 58SSC only igniter comes on, no burners. [ 0 Answers ]

This is an older furnace but it has always worked fine until this year. I have had it inspected a couple of years ago also along with my upstairs neighbor who had problems and decided to replace her furnace, which was also a Carrier of the same year. I looked at some of the posts and tried cleaning...

Replace shower valve without having access panel [ 3 Answers ]

I need to replace an old Delta single handle "crystal ball" style shower valve with a new Price Pfister valve. Trouble is, I have no access to back of shower due to another bathroom located directly behind this one. I realize that I will probably have to cut into the fiberglass shower to make...

View more questions Search

Check out some similar questions!

Add your answer here.