My furnace won't come on.

dbutchr Posts: 1, Reputation: 1

New Member

Dec 5, 2009, 02:32 PM

My furnace won't come on.

The furnace clicks once when it is supposed to come on. I pulled off the access panels to check the wiring for anything loose and when I put it back on the unit came on. After it reached the desired temp it cut off. When it was supposed to come back on it presented the same symptoms.

Check out some similar questions!

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Furnace blows cold air unless switched at furnace side [ 3 Answers ]

Hope someone can help: Anywhere below being set at 70 degrees, our furnace blows cold air once it reaches the desired temp. It blows, and blows, and it feels almost as cool as AC! I have to go physically to the actual furnace to switch the switch off and then on and it stops. The "fan" switch on...

Add on coal/wood furnace thermostat wiring for 2 zone house with oil furnace [ 1 Answers ]

I purchased a Harman wood / coal furnace model SF-2500 (forced hot air system) and am tying into my existing forced hot air oil furnace 2 zone system and do not know how to tie into the existing thermostats and zones. I wish to still use the 2 separate zones for the bedrooms and the main body of...

Furnace ignites but blower won't start till furnace shuts down. [ 7 Answers ]

(Nordyne/Miller G3RA)-I have a furnace HSI(glow plug) that will ignite and burn until it gets too hot and shuts down. As soon as the furnace shuts down the blower starts to circulate air. The blower circulating air cools the furnace and it reignites.Shortly after the furnace ignites the blower...

Furnace not heating the house. Damper on the furnace not opening. Motor then shuts. [ 4 Answers ]

My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:

View more questions Search

Check out some similar questions!

Add your answer here.