Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New dimmer switch will not dim light - taking power from 3 way switch
[ 2 Answers ]
New dimmer switch will not dim light - I am trying to hook up a dimmer switch in a electrical box that already contains a three way switch. I am trying to take power from the three way switch to power the new dimmer and light. The way it is hooked up now the new light works but will not dim with...
How do I wire 6 recessed lights to 1 dimmer switch with 12-3 power and 12-2 to lights
[ 1 Answers ]
How do I wire 6 recessed lights to 1 dimmer switch with 12-3 power wire source and 12-2 to between the 6 lights and then using 12-2 witing to the single pole switch?--need your help please
Two Lights on One Switch, Power to Light, Open Ground
[ 9 Answers ]
I'm struggling with a pair of lights in a small workroom. The circuit comes in and feeds the two lights (on one switch) and three outlets from the 2nd (middle) light. I figured out that I needed to make two hot whites leading to the switch from the first light so I made both of the whites hot...
Converting pull switch lights to wall switch
[ 3 Answers ]
I've been struggling finding the answer to this in books and online, it seems as if it should be an easy question and something that gets done all the time. Looking for some help. My basement has several rooms and all lights are wired "hot" with pull switches from each light receptacle. When the...
3 lights ran between 2 3-ways, can one of these lights be controlled by a 3rd switch?
[ 2 Answers ]
There are 3 lights connected, 2 in one room and the third at the bottom of the stairs. There is a 3-way at the top of the stairs and another in the room with the 2 lights. This guy would like to also be able to switch off just the 3rd light at the bottom of the stairs. I did not dig into this too... View more questions Search
|