 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Moen balancing spool 1423
I had a plumber install a shower/ spa it is a moentrol and all I can get is hot water and I have pulled the shower apart and checked the spool it was clear and I checked the cartriges and I screwed the two screws on each side of the spool all the way out and half way in and it would change the temperature one way or the other but it was eathier hot or cold no happy medium. The cartridge looked good. Does any body think the balancing spool could be messed up or any suggestions?[email protected]
|
||||
Check out some similar questions!
I just replaced the shower cartridge (1225) for my Moen Shower valve- 1982 vintage. I couln't completely shut off the water before. However, the water temperature fluctuates a great deal. I backflushed the valve with vinegar and CLR. Also, tried liquid wrench. I tried to remove the...
How do I respool a weedeater Twist N Edge 17" cut Model TE 475?
Is there a right and wrong way to install the balancing spool on a Moen shower faucet. I took the old one out and I have a little less water pressure on the hot then the cold but not much. But when the valve is all together The hot what is had to find and doen't get very hot. It seems to run out...
Have looked at some of the questions and answers regarding spoolsv.exe but have not found the solution to my problem. When I STOP Print Spool, I can access my programs, but cannot print or preview, when I start Print Spool, I can access my programs, but it then freezes and does not respond. The...
My Glacier Bay single handle shower water control balancing spool does not do its job. Can it be taken apart and cleaned? Should the piston slide freely? Should it rotate? Do I need a special tool to remove it from the body? Or throw it out and get a new one? I think I said it all. John
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
