[lamalolo]

Hello there

I have a frigidaire electric dryer. A few months ago it stopped working. It was not in the middle of the cycle, but, when I tried turning it on, it would not. All the button on the control panel worked and made their regular beeping size.
Back then, a friend came to visit and checked out the diagnostics. In that mode, everything was working, including turning, heating, etc.
But, he did not know what was wrong, so I planned to get a repair person in when I can.
Then, in the next few days, I checked the dryer again, and it was working, no problem.

That is, until a few days ago, when the same problem seemed to happen. Not working at all other than the beeps.

All I tried so far is to take it out of the electricity.

What do you think? What should I do?

Thank you very much in advance.

lamalolo

[lamalolo]

Just in case anyone might be trying to figure this out...

I ran diagnostics which bring up error code e9e that should mean some type of electric problem as in a wire gone bad leading to the dryer or the control board.

But - I found the manual of the dryer online that says if the dryer will not start it can be the thermal limiter, to call a technician to replace.

Thanks!

lamalolo